by Peter Laganowski | Feb 13, 2020 | Fryers, Troubleshooting
What Is an Ignition Issue? Ignition Failure occurs when the ignition module fails to sense a flame within 4 seconds of the “call for heat” signal and locks out. When this happens, the Module will send a 24 VAC signal through the Interface Board’s alarm circuit to the...
by Peter Laganowski | Feb 4, 2020 | Preventative Maintenance & Cleaning, Water Filter
Before replacing the filter, make sure there is ample space around the system to remove the cartridge. Note: Always install a new Carbon Element after replacing the Ultra Filter Cartridge. Step 1: Turn off water to the system by closing the Inlet Ball Valve and Outlet...
